Page 7
SUPPLIED COMPONENTS AND HARDWARE (CONTINUED)
NOTE
:
• To order more hardware, contact support at av.support@legrand.com or (866) 977-3901.
• Additional hardware is included that may not be required for your installation.
3 PERSON ARC, 3 PERSON ANGLE, OR 5 PERSON ANGLE TABLE (IF PURCHASED, CONTINUED)
(12x)
#8 x 5/16”
Pan Head Phillips
Sheet Metal Screws
W
Wiremold On Surface
Primary ModPower Unit (If Purchased)
(Model Number: MDSA10-WH)
Wiremold On Surface
Middle ModPower Unit (If Purchased)
(Model Number: MDCA3-WH)
Wiremold On Surface
End ModPower Unit (If Purchased)
(Model Number: MDEA3-WH)
REQUIRED TOOLS
WARNING
: Use tools with caution and
follow all necessary safety protocols.
AVERTISSEMENT
: Utiliser des outils
avec prudence et suivre tous les
protocoles de sécurité nécessaires.
• #2 Phillips Bit
• #2 Phillips Screwdriver
• Toothpick or Small Straw
• Adjustable Wrench
• ½” Socket
• Awl
•
¾
” Socket
• Protective Eyewear
• Socket Wrench
• 5/16” Socket
• Power Driver
• ½” Drill Bit
• 7/16” Socket
• 3/32” Drill Bit
(4x)
10-32 x ½” Pan
Head Screw
U
(4x)
10-32
Flange Nut
T
Modesty Panel
Pair
X
Modesty Panels for 3 Person Arc (Front and Back, Respectively)
Modesty Panels for 3 Person Angle Table
Modesty Panels for 5 Person Angle Table
Table Top
NOTE
: Available tables include 3 Person Arc, 3 Person Angle, and 5 Person Angle models shown.
V
3 Person Arc
3 Person Angle
5 Person Angle
