30
4.3 Transportation and unpacking
4.3.1 Transportation
The UPS can be transported by motor-driven forklift (as shown in Figure 4-3.) or manual forklift (as shown in
Figure 4-4). While lifting, please keep the UPS center of gravity at that of the forklift and move slowly
and smoothly.
The UPS should be transported by trained professionals. During transportion,
please take necessary precautions to avoid impact or UPS falling off. If the UPS
needs to be stored for a long time after unpacking, it is suggested to package the
UPS with original plastic bag.
CAUTION
4.3.2
Unpacking
Step 1
Check if the package is in good condition and if there is any damage due to transportation. If
damaged, please inform the carrier immediately.
Step 2
Transport the UPS to assigned site.
Step 3
Unpack the external package, remove the foam pad and plastic bag, and take out the accessories.
Step 4
Check the UPS:
• Inspect the UPS and check if there is any damage caused by transportation. If yes, inform the
carrier immediately.
• Compare with the packing list and check if the accessories mode is complete and proper. If
there are missing accessories or if the wrong model has been delivered, please take note and
contact Numeric or our partner immediately.
Step 5
Dismantle the 4 fastened bolts at the bottom supporting plate and UPS and 4 fastened bolts of
wooden bracket and bottom supporting plate, and then, remove the supporting plates, as shown in
Figure 4-5.
Note:
The bottom supporting plates of the UPS are the same.
Figure 4-3. Motor-driven forklift
While lifting the UPS, pay attention to the balance and stability of
the UPS.
During the movement, keep the UPS vertical and do not put down or
cause sudden movements.
CAUTION
Figure 4-4. Manual forklift
Figure 4-5. Remove bottom supporting plates
