29
Player Portfolio Audio System
| Product Manual
NV-P5200-XX AMPLIFIER
NOTE:
Using multiple P5200 units in a single installation will require dedicated power. Please use one dedicated 15 amp circuit for every two P5200’s installed. The P5200 is
capable of creating large amounts of output power. When the P5200 is used at high levels of output, it can generate a substantial amount of heat. The P5200 must be installed in
a manner that allows for adequate dissipation of heat. That may include allowing at least one blank space above and below the unit in a rack configuration as well as forced-air
thermal management such as rack-mounted fans. For further guidance on proper thermal management, please see
https://www.middleatlantic.com/thermal-management-white-
Input/Output Connectors
Line Input
(3) TRS 3.5 mm mini TOSLINK
Combo Receiver
Line Output
(3) TRS 3.5 mm mini TOSLINK
Combo Receiver
Trigger Output
(3) TS 3.5 mm stereo jack 5v DC
20mA (tip positive)
Speaker Output
(3) (Four-contact) Pluggable
USB 2.0 Connection
Three (3)
Local Area Network (LAN)
(1) RJ45
Supported Audio Formats
Music File
(USB or over network)
MP3 (.mp3)
WMA (.wma)
AAC (.acc)
Ogg Vorbis (.ogg)
FLAC (.flac)
WAV (.wav)
Streaming Music Services
Amazon Music (with Alexa use)
Deezer
iHeart Radio
Napster
Pandora
SiriusXM
Spotify
TuneIn
Playlist Support
WPL
M3U
PLS
iTunes
IP Control
Apple iTouch
®
Apple iPhone
®
Apple iPad
®
Android Mobile
Android Tablet
Various Third-Party Systems
Network Connectivity
LAN (Wired Connection)
10/100Base-T Ethernet
Internal Ethernet switch to three
independent zone nodes
Amplifier Output (typical of three zones)
Rated Output Power
(1 kHz/1% Distortion)
4 Ohm
400 W (200 W x 2)
6 Ohm
300 W (150 W x 2)
8 Ohm
200 W (100 W x 2)
Total Harmonic Distortion
(1/2 Power)
100 Hz 0.005%
1 kHz
0.005%
6.67 kHz 0.020%
Speaker Impedance
4-8 Ohms
Frequency Response
(20 Hz - 20 kHz)
+/-0.5 dB
Damping Factor
80+
Signal-to-Noise Ratio,
Rated Output
100 dBA
Line Output (Digital)
Sample Rates
44.1 kHz–192KHz
Bit Rate
24 B
Signal-to-Noise Ratio,
Rated Output
120 dBA
THD+n
<0.0005%
Frequency Response
(20 Hz - 20 kHz)
+/-0.1 dB
Line Input (Digital)
Sample Rates
44.1 kHz–192 kHz
Bit Rate
24 B
Signal-to-Noise Ratio,
Rated Output
120 dBA
THD+n
<0.0005%
Frequency Response
(20
H
z
–20kHz)
+/-0.1 dB
Line Output (Analog)
Output Level
0-2.0 V RMS
Output Impedance
470 Ohms
Signal-to-Noise Ratio, Rated
Output
>100 dB SNR
THD+n
<0.005%
Frequency Response
(20 Hz - 20 kHz)
+/-0.5 dB
Line Input (Analog)
Input Impedance
10 kOhms
Input Overload
2.0 V RMS
Audio Processing
Bass Equalization
+/- 12 dB range
Treble Equalization Balance
+/- 12 dB range
Regulatory Approvals
Safety
cTUVus, CE-LVD
EMC
FCC, IC, CE-EMC, C-Tick
Environmental
RoHS
Power Requirements
Input Voltage
100-240 VAC, 50/60 Hz
Power Consumption (max)
1577 W
Power Consumption
(typical - 1/8 audio power)
171 W
Operating Temperature
32˚F to 104˚F
0˚C to 40˚C
Physical Specifications
Unit Size (mm)
258 D x 430 W x 88 H
Unit Size (inch)
10.16 D x 16.93 W x 3.46 H
Unit Size with feet (mm)
258 D x 430 W x 98 H
Unit Size with feet (inch)
10.16 D x 16.93 W x 3.74 H
Unit Weight (kg)
5.1
Unit Weight (pounds)
11.3
Shipping Specifications
Unit Size (mm)
565 D x 330 W x 175 H
Unit Size (inch)
22.24 D x 12.99 W x 6.89 H
Unit Weight (kg)
5.88
Unit Weight (pounds)
12.98
Languages Supported
English, French, German, Italian, Portuguese, Spanish
Nuvo reserves the right to change specifications without notice.
