UNIT DESCRIPTION
The LightSense™ Wireless devices use radio signals to communicate with each
other to control lighting and other types of electric loads in selected areas.
LightSense wireless devices use the 900MHz band for high-speed control
communication. Using the patented “frequency-agile” Top Dog™ technology,
LightSense wireless devices avoid interference with other 900MHz devices,
such as cordless phones and baby monitors.
Load Types
Use the PSWDI incandescent dimmer for these load types (60-600W at 120V):
• Incandescent & quartz halogen lamps
Do not mix different load types
on the same dimmer.
Do not use with diode equipped
(some types of energy saving) lamps.
Do not use for motors
.
For dimmable, 2-wire fluorescent and compact fluorescent fixtures, electronic
low voltage, neon or cold cathode fixtures or diode equipped lamps, use the
LightSense PSWDU wireless universal dimmer, or the LightSense PSHDU
universal dimmer.
Derating
When
more than one dimmer is installed in a multi-gang box, it is necessary to
reduce the maximum load on each dimmer.
• For a dimmer in either end position of a multi-gang box, reduce its maximum
load to 500W.
• For a dimmer in a central position of a multi-gang box, reduce its maximum
load to 400W.
Call 800.223.4185 for Technical Support
CAUTION
To reduce the risk of
overheating and possible
damage to other equipment, do
not install to control a receptacle,
a motor-operated appliance, or a
fluorescent lighting fixture.
CAUTION
Afin de réduire le risque de
surchauffe et la possibilité
d’endommager d’autres matériels,
ne pas installer pour commander
une prise, un appareil à moteur,
ou une lampe fluorescente.
