Ju
ne
20
18
28 Legrand PDU User Guide
b. The PDView shows the "Connected" message when it detects the connected Legrand PDU.
2. If the factory-default user credentials "admin/raritan" remain unchanged, PDView automatically logs in to
the web interface of Legrand PDU.
If they have been changed, the login screen displays instead and you must enter appropriate user
credentials for login.
3. The web interface opens. Now you can view or modify the data of Legrand PDU.
The web interface prompts you to change the password if this is the first time you log in.
Tip: You can store the updated "admin" or other user credentials in PDView so that automatic login always
functions properly upon detection of the Legrand PDU. See
Saving User Credentials for PDView's
Automatic Login
(on page 28).
Saving User Credentials for PDView's Automatic Login
When PDView detects the Legrand PDU, it automatically attempts to log in with the factory-default user
credentials --
admin
(user name) and
raritan
(password).
If you have modified the factory-default user credentials, PDView's automatic login fails and the login screen
displays for you to manually enter user credentials.
To make automatic login work again, you can save the modified admin credentials or any custom user
credentials in PDView. A maximum of 5 user credentials can be saved, and PDView will try these credentials
one by one until the login succeeds.
The following procedure illustrates iPad only, but the procedure applies to any iOS or Android mobile
devices.
To save user credentials in PDView:
1. Make sure your mobile device is NOT connected to the Legrand PDU so that PDView does NOT perform
the automatic login feature after it is launched.
2. Launch PDView on your mobile device.
