Ju
ne
20
18
298 Legrand PDU User Guide
Setting the Z Coordinate Format for Environmental Sensors
This command enables or disables the use of rack units for specifying the height (Z coordinate) of
environmental sensors.
config:#
pdu externalSensorsZCoordinateFormat <option>
Variables:
<option> is one of the options:
rackUnits
or
freeForm
.
Option
Description
rackUnits
The height of the Z coordinate is measured in
standard rack units.
When this is selected, you can type a numeric
value in the rack unit to describe the Z coordinate
of any environmental sensors or actuators.
freeForm
Any alphanumeric string can be used for
specifying the Z coordinate.
Note: After determining the format for the Z coordinate, you can set a value for it. See
Setting the Z
Coordinate
(on page 365).
Enabling or Disabling Peripheral Device Auto Management
This command enables or disables the Peripheral Device Auto Management feature.
config:#
pdu peripheralDeviceAutoManagement <option>
Variables:
<option> is one of the options:
enable
or
disable
.
Option
Description
enable
Enables the automatic management feature for
environmental sensor packages.
disable
Disables the automatic management feature for
environmental sensor packages.
For more information, see
How the Automatic Management Function Works
(on page 98).
