Ju
ne
20
18
326 Legrand PDU User Guide
config:#
security ipAccessControl ipv4 rule modify <direction> <rule_number> policy
<policy>
Modify all contents of an existing IPv4 rule:
config:#
security ipAccessControl ipv4 rule modify <direction> <rule_number> ipMask
<ip_mask> policy <policy>
IPv6 commands
Modify an IPv6 rule's IP address and/or prefix length:
config:#
security ipAccessControl ipv6 rule modify <direction> <rule_number> ipMask
<ip_mask>
Modify an IPv6 rule's policy:
config:#
security ipAccessControl ipv6 rule modify <direction> <rule_number> policy
<policy>
Modify all contents of an IPv6 existing rule:
config:#
security ipAccessControl ipv6 rule modify <direction> <rule_number> ipMask
<ip_mask> policy <policy>
Variables:
<direction> is one of the options:
in
or
out
.
Direction
Description
in Inbound
traffic.
out Outbound
traffic.
<rule_number> is the number of the existing rule that you want to modify.
<ip_mask> is the combination of the IP address and subnet mask values (or prefix length), which are
separated with a slash. For example, an IPv4 combination looks like this:
192.168.94.222/24
.
<policy> is one of the options:
accept,
drop
or
reject
.
Option
Description
accept
Accepts traffic from/to the specified IP
address(es).
drop
Discards traffic from/to the specified IP
address(es), without sending any failure
notification to the source or destination host.
reject
Discards traffic from/to the specified IP
address(es), and an ICMP message is sent to the
source or destination host for failure notification.
