Ju
ne
20
18
236 Legrand PDU User Guide
If there are live webcam sessions:
All Live Preview window sessions sharing the same URL, including one Primary Standalone Live Preview
window and multiple Secondary Standalone Live Preview windows, are identified as one single "<webcam>"
user in the Connected Users list. You can disconnect a "<webcam>" user to terminate all sessions sharing
the same URL.
The IP address refers to the IP address of the host where the Primary Standalone Live Preview window
exists, NOT the IP address of the other two associated sessions.
For more webcam information, see
Webcam Management
(on page 247).
Viewing or Clearing the Local Event Log
By default, the Legrand PDU captures certain system events and saves them in a local (internal) event log.
You can view over 2000 historical events that occurred on the Legrand PDU in the local event log. When the
log size exceeds 256KB, each new entry overwrites the oldest one.
To display the local log:
1. Choose Maintenance > Event Log.
Each event entry consists of:
ID number of the event
Date and time of the event
Tip: The date and time shown on the Legrand PDU web interface are automatically converted to your
computer's time zone. To avoid any time confusion, you can apply the same time zone settings as those
of Legrand PDU to your computer.
Event
type
A description of the event
2. To view a specific type of events only, select the desired event type in the Filter Event Class field.
3. The log is refreshed automatically at a regular interval of five seconds. To avoid any new events'
interruption during data browsing, you can suspend the automatic update by clicking
.
To restore automatic update, click
. Those new events that have not been listed yet
due to suspension will be displayed in the log now.
4. To go to other pages of the log, click the pagination bar at the bottom of the page.
When there are more than 5 pages and the page numbers listed does not show the desired one, click
to have the bar show the next or previous five page numbers, if available.
5. If wanted, you can resort the list by clicking the desired column header. See
Sorting a List
(on page 86).
To clear the local log:
1. Click
on the top-right corner.
