Ju
ne
20
18
Legrand PDU User Guide 91
A bar showing OCP current levels
OCP status -- open or closed
Associated line pair
The RMS current bars automatically change colors to indicate the current status if OCP thresholds have
been enabled. To configure thresholds, see
OCPs
(on page 110).
Status
Bar colors
normal
above upper warning
above upper critical
Note: The "below lower warning" and "below lower critical" states also show yellow and red colors
respectively. However, it is not meaningful to enable the two thresholds for current levels.
Dashboard - Alerted Sensors
When any internal sensors or environmental sensor packages connected to the Legrand PDU enter an
abnormal state, the Alerted Sensors section in the Dashboard show them for alerting users. This section also
lists tripped circuit breakers or blown fuses, if available.
To view detailed information or configure each alerted sensor, you can click each sensor's name to go to
individual sensor pages. See
Individual Sensor/Actuator Pages
(on page 125).
If wanted, you can resort the list by clicking the desired column header. See
Sorting a List
(on page 86).
Summary in the section title:
Information in parentheses adjacent to the title is the total number of alerted sensors.
For example:
1 Critical
: 1 sensor enters the critical or alarmed state.
- Numeric sensors enter the critical state.
- State sensors enter the alarmed state.
