Dominion LX II Quick Setup Guide
1
QSG-DLX2-v3.0.0-0A-E
255-62-0024-00
Dominion® LX II
Thank for choosing the Dominion LX II, designed for
economical, reliable and secure remote access and
management.
This Quick Setup Guide explains how to install and
configure the LX II.
Package Contents
Each LX II ships as a stand-alone product in a standard 1U 19" rackmount chassis.
The LX II device ships with the following contents:
•
1 - LX II device
•
1 - LX II Quick Setup Guide
•
1 - Rackmount kit
•
1 - AC power cord
•
1 - Set of 4 rubber feet (for desktop use)
•
1 - Warranty card
QS Rule
In Raritan products that require Rack Mounting, please follow these precautions:
•
Operation temperature in a closed rack environment may be greater than room temperature. Do not exceed the rated maximum ambient
temperature of the appliances. See
Specifications
in Administrators Guide.
•
Ensure sufficient airflow through the rack environment.
•
Mount equipment in the rack carefully to avoid uneven mechanical loading.
•
Connect equipment to the supply circuit carefully to avoid overloading circuits.
•
Ground all equipment properly, especially supply connections, such as power strips (other than direct connections), to the branch circuit.
QS Rule
Rack Mounting
The LX II can be mounted in 1U (1.73", 44 mm) of vertical space in a standard 19" equipment rack. You can mount the LX II facing the front of the
rack or facing the rear of the rack.
To rack-mount the LX II, use the brackets and screws that came with the device.
Forward Mount
The steps in the table correspond to the numbers shown in the front rackmount diagrams.
1.
Secure the cable-support bar to the back end of the side brackets using two of the included screws.
QUICK SETUP GUIDE
DLX2-108, DLX2-116, DLX2-216
