Dominion LX II Quick Setup Guide
2
QSG-DLX2-v3.0.0-0B-E
255-62-0024-00
Rear Mount - Switch-Only Models - DLX2-108, DLX2-116,
DLX2-216
Numbered steps correspond to the numbers in the diagram.
1.
Secure the cable-support bar to the front end of the side
brackets, near the side brackets' "ears," using two of the
included screws.
2.
Slide the LX II between the side brackets, with its rear panel
facing the cable-support bar, until its front panel is flush with
the back edges of the side brackets.
3.
Secure the LX II to the side brackets using the remaining
included screws (three on each side).
4.
Mount the entire assembly in your rack and secure the side
brackets' ears to the rack's front rails with your own fasteners.
5.
When connecting cables to the rear panel, drape them over the
cable-support bar.
QS Rule
Rack Mounting - Integrated Switch/LED Drawer Models
- DLX2-108-LED, DLX2-116-LED, DLX2-216-LED
1.
Adjust the length of the brackets to match the mounting depth
of your rack. Brackets are labeled Left Front and Right Front.
Now the brackets look similar to the following.
2.
Fasten the brackets to the rack rails securely with your own
screws or cage nuts.
3.
Slide the LX II between the brackets.
4.
Fasten the LX II to the rack using screws.
QS Rule
Step 1: Configuring Network Firewall Settings
•
TCP Port 5000: Allow network and firewall communication to
enable remote access.
•
TCP Port 443: Allow access to the standard HTTPS port to
enable access via web browser.
•
TCP Port 80: Allow access to the standard HTTP port to enable
redirection of HTTP requests.
QS Rule
Step 2: Configuring KVM Target Servers
Mouse Settings
Absolute Mouse Synchronization is recommended to minimize
mouse settings on target servers.
In this mode, absolute coordinates are used to keep the client and
target cursors in synch, even when the target mouse is set to a
different acceleration or speed. This mode is supported on servers
with USB ports and is the default mode for virtual media CIMs.
•
Absolute Mouse Synchronization requires the use of a virtual
media CIM - D2CIM-VUSB, D2CIM-DVUSB, D2CIM-DVUSB-DVI,
D2CIM-DVUSB-HDMI, D2CIM-DVUSB-DP, D2CIM-VUSB-USBC
Target Server Video Resolutions
See
Supported Target Server Video Resolutions
in
Online Help
.
QS Rule
