Appendix A: Using the KVM Client
79
Setting
Description
Noise Filter
This slider controls the noise filter
threshold.
Left: higher threshold.
Right: lower threshold.
See
Noise Filter
(on page 81).
Reset to Defaults
Reset connection properties to the factory
defaults.
3.
Click OK to save any changes made. The settings are stored persistently for
the accessed port.
To view connection information:
•
Click the Info tab in the same dialog.
Item
Description
Device Name
The KVM switch's name.
Host / Port
The KVM switch's IP address, and the
TCP/IP port used to access the KVM
switch.
Target Name
The accessed KVM port's name.
Data In / Out
Rate of data received and sent out to the
KVM switch in bytes per second.
Decoded FPS
Number of frames per second that were
received and decoded by the KVM Client.
Average FPS
Average number of frames per second
Summary of Contents for Raritan Dominion User Station
