Chapter 7: Using the Web Interface
402
The maximum amount of snapshots that can be stored on the PX3TS is
10. If you set it for a number greater than 10 and the storage location
is on the PX3TS, after the 10th snapshot is taken and stored, the oldest
snapshots are overwritten. Storing snapshots on a remote server does
not have such a limitation.
▪
Time before first snapshot - the amount of time in seconds between
when the event is triggered and the webcam begins taking snapshots.
▪
Time between snapshots - the amount of time in seconds between
when each snapshot is taken.
▪
Folder - names of the folders that will be automatically created to
store webcam snapshots after the recording action is triggered by the
rule you will configure.
Note that the Folder field is available only when the selected webcam
has been configured to store its snapshots on an "FTP" server. See
Changing Storage Settings
(on page 502).
Folder name options
Definition
Serial number / Webcam name
Two folders will be created.
▪
The parent folder's name is the serial number of PX3TS.
▪
The subfolder's name is the selected webcam's name.
Serial number / Webcam name /
Rule name
Three folders will be created.
▪
Definitions of the parent folder and first subfolder are the same as the
first row.
▪
The final subfolder's name is the name of event rule that triggers this
recording action.
Serial number / Webcam name /
Timestamp
Three folders will be created.
▪
Definitions of the parent folder and first subfolder are the same as the
first row.
▪
The final subfolder's name is the time when the recording event
occurs, which is the accumulated time in seconds since 1970/1/1.
Serial number / Webcam name /
Rule name / Timestamp
Four folders will be created.
▪
Definitions of the parent folder and first subfolder are the same as the
first row.
▪
The second subfolder's name is the name of event rule that triggers
this recording action.
▪
The final subfolder's name is the time when the recording event
occurs, which is the accumulated time in seconds since 1970/1/1.
Summary of Contents for Raritan PX3TS
