5
No: IS-00722 Rev. 2
Scroll down to the next device screen for:
Default Profile
•
When the device is reset, (power outage, etc.) this selects
whether the first (enabled) profile in the profile list or the
last (enabled) used profile is active when the screen boots.
Proximity Sensitivity
Network Settings
•
Select
dhcp
or
static
, see below if static is selected
Reset user settings / reload:
•
This will reload, (replace)
all
of the devices information from the
controller
Network Settings / Static:
•
IP Address – xxx.xxx.xxx.xxx
•
Netmask – xxx.xxx.xxx.xxx
•
Default Gateway – xxx.xxx.xxx.xxx
•
DNS Server – xxx.xxx.xxx.xxx
•
Click save when finished entering static IP information
Scroll left to the
info
screen:
Device Information –
•
IP Address: xxx.xxx.xxx.xxx
•
Part Number: xxxxxx
•
Serial Number: xxxxxxx
•
App Version – xx.xx.xx (used in diagnostics)
•
Kernel Version – version and date (used in diagnostics)
•
Rootfs Version – xx.xx.xx (used in diagnostics)
•
Up Time: x day(s) x:xx
•
Controller Info –
•
Controller IP – xxx.xxx.xxx.xxx
•
Controller Firmware: x.x.x.x
•
Connection Location: local
•
Connection Mode: multicast
8.
9.
WIDGETS OVERVIEW
For detailed information about all widgets and other profile and settings screens, click on file link below to load Widget Instructions:
LINK:
