3
No: IS-00711 – Rev. A
Press and hold here on
front, bottom center
Set 1/16” hex screw
in station bottom
1/16” HEX
A
B
C
INSTALLATION OVERVIEW
EQUINOX 41-LCAP STATION INSTALLATION STEPS
1.
Run PoE Ethernet bus to four square junction box
2.
Install ring with screws provided (figure
A
)
3.
Connect RJ45 to station
4.
Install sta
tion by rotating (figure
B
) and connecting the top first.
Press station in and hold on bottom center while securing the hex
screw with provided allen wrench (figure
C
)
*Ethernet Bus:
Power and communication; Ethernet, PoE or PoE+, (Optional) - Ethernet 4 Port PoE Injector (part# DA2400)
EQUINOX 41-LCAP
TOUCHSCREEN
NETWORK PANEL
OR SWITCH
ETHERNET PoE or PoE+
Harv...
Open
Rest Ge...
PoE/PoE+
ETHERNET BUS
SCREWS*
*Use flat-head
screws provided
US – 6-32 x 0.75”
RJ45 CONNECTOR
4 SQUARE JUNCTION
BOX RING
EQUINOX 41-LCAP
LCD SCREEN
