4
No: IS-00711 – Rev. A
CONFIGURATION
FIRST TIME SETUP
DEVICE SETTINGS OVERVIEW
1.
Connect PoE Ethernet Bus
2.
Add the Equinox 41-LCAP station to your project from the
Vantage Objects: Touchscreens
folder
3.
Highlight station in Design Center; click
Configure Stations
•
In
Settings
I
System Preferences
I
General Preferences
, make sure
Exclude Ethernet Bus when configuring stations
is not checked
4.
When station displays
configure mode, touch to configure
, tap station
-
OR
-
5.
The station may also be configured by typing the serial number in the project file. Using this method the station will be configured
when the system is programmed.
1. First Time Setup:
Click on
Create
Admin Password
to establish a custom
password. Using the keyboard, type in a
password and press check to confirm.
2.
Once the Admin Password is established, press
Initialize System
to
access the current default view with all on/all off control.
2. About
- Discover information about
the Equinox 41-LCAP including serial
number, part number, and application
edition
Also, identify the connected controller IP
address
Are...
Initialize System
Create Admin Password
Are...
Are...
Are...
Initialize System
SETTINGS
1.
Access the main settings panel
by clicking on the gear icon in the
top right screen
Settings
About Device
1234567
EQ41-LCAP
Part Number
1.0.1
Application
RootFS
Serial Number
Settings
Kernel
2.6.35.3 Fri May 5 09:5
192.168.5.107
0 day(s) 4:1
7
Uptime
192.168.5.
117
Hardware IP
Connected Controller
