2
No: IS-000721 – Rev. 3
Description
Specification
Dimensions, HWD (at wall surface)
4.9” x 3.44” x 0.44” (124mm x 87mm x 11mm)
Dimensions, HWD (overall)
4.9” x 3.44” x 1.1” (124mm x 87mm x 28mm)
Finished Weight
8.8 oz. or 249.5g
Power
Ethernet with PoE, PoE+, 5W
Wiring Connections
Communication and power: PoE/PoE+ via Ethernet RJ45
Surge Suppression
Yes
Maximum Gangs
Single gang only
LCD Button Status
Automatic (white = off, orange = on)
Mounting
US/European style, single gang, wall boxes or low-voltage brackets
Addressing
Self-addressing through software
Finish
Trim: Titanium, Touchscreen: Black glass
Glass Surface
Chemically strengthened
Ambient Operating Temperature
32-95°F (0-35°C)
Ambient Operating Humidity
5-95% non-condensing
CE/FCC Compliant
Yes
System Requirements
LMEQ-41 is compatible with LMCS 4.8 software or higher. For new
projects it is recommended that firmware and software be kept to the
most current release
SPECIFICATIONS
LMEQ-41 STATION INSTALLATION STEPS
Installation of Legrand products should be performed or supervised by a certified Legrand installer. The LMEQ-41 uses a four square
metal junction box with single-gang mudring, or a low-voltage bracket can be used if application allows. Connect to local network via
PoE/PoE+ RJ45 Ethernet connection into the LMTI-100-xxx.
Press and hold here on
front, bottom center
Set 1/16” hex screw
in station bottom
1/16” HEX
A
B
C
1.
Run PoE Ethernet cable to four square junction box
2.
Install ring with screws provided (figure
A
)
3.
Connect RJ45 to station
4.
Install station by rotating (figure
B
) and connecting the top first.
Press station in and hold on bottom center while securing the hex
screw with provided allen wrench (figure
C
)
