Wiremold Electrical Systems conform to and should be
installed and properly grounded in compliance with
requirements of the current National Electrical Code,
Canadian Electrical Code or codes administered by
local authorities.
All electrical products may represent possible shock or fire
hazard if improperly installed or used. Wiremold electrical
products are UL listed. Made for interior use only and
should be installed in conformance with current local
and/or the National Electrical Code.
5500 and 5400 Series Surface
Nonmetallic Raceway Systems
INSTALLATION INSTRUCTIONS
Installation Instruction No.: 41590R5 – Updated July 2005
Recommended Cutting Tools & Fasteners*
Herramientas de corte y sujetadores recomendados**
Outil de coupe et attaches recommandés***
Miter Saw
Use una sierra de ingletes
Scie à onglet
5400TB
5500BD3
5500C
5400C
5400TC
Use a #8 [5/16", 7.9mm Head Size] Pan Head Screw or equivalent.
Use un tornillo de cabeza redonda N° 8 (con cabeza de 7.9mm
[5/16"] o equivalente.
Utilisez une vis BER n°8 (tête do 7,9mm [5/16 po]) ou équivalent.
* Not supplied.
** No se incluye(n).
*** Non fournis.
1
2
3
8
6
13
12
14
11 15
3
2
4
9
7
5
16
