10
Fig. 7
Fig. 8
Fig. 9
9. Center body to motorcycle using a framer’s
square.
10.
See Fig. 7
. Obtain a height measurement for
both sides, adjusting body until equal measure-
ments are obtained on both sides.
11.
See Fig. 8
. Obtain a center-to-center meas-
urement for both sides, adjusting body until
equal measurements are obtained on both
sides.
12.
See Fig. 9
. Obtain a front-to-back measure-
ment for both sides, adjusting the body until
equal measurements are obtained on both
sides.
13. The body has been centered when all meas-
urements are within 1/8” of each other.
Obtain same measurement
for both sides + or - 1/8”
Obtain same measurement
for both sides + or - 1/8”
Obtain same measurement
for both sides + or - 1/8”
R & R BODY CONTINUED
