9
Fig. 5
Fig. 4
3. Insert (2) original fender washers saved from
disassembly to inside frame rails (front loca-
tion).
CAUTION: Use caution when placing body
as rear fender braces may cause paint
damage.
4. Using two people, carefully lift prepped body
onto trike.
5. With two people holding body on either side of
motorcycle, slide body forward in between
fender braces.
NOTE: The order of installation for the body
mounting hardware is as follows:
Nut (inside body)
Fender washer (inside body)
Body
Rubber washer (inside body)
Bushing (outside body)
See Fig. 5
. Grab handle brackets
(outside body)
Frame (outside body)
Lock washer (outside body)
Bolt (outside body)
6.
See Fig. 4
. While one person steadies body
from behind, insert (2) 5/16” x 3 NC button-
head bolts (front), (2) rubber washers, (2)
5/16” x 1-1/2” plated fender washer, (2) body
mount bushing, (2) 1/4”-20 lock nut, and (2)
5/16” SS lock washer and leave bolts loose for
body adjustment.
7. The rear fender brace holes will include the
following: (2) 5/16” x 3 NC button-head bolts,
(2) rubber washer, (2) 5/16” x 1-1/2” plated
fender washer, (2) body mount bushing, (2)
1/4”-20 lock nut, and (2) 5/16” SS lock washer.
NOTE: See Fig. 6. The body mount bushing
must be inserted with taper facing inward.
8. Snug rear two bolts using
1/2” wrench
and
3/16” Allen head socket.
Attach
front
section
first
Hook
rear
section
into
place
Front fender brace bolts
Fig. 6
Taper faces inward
body mount bushing
R & R BODY CONTINUED
