BD
A CAP
TOS MIF
ARE / CAP
TOS iChar
ge MIF
ARE 22-09-22 (GB)
15
INSTRUCTIONS FOR OPERATION AND CONFIGURATION
To read a transponder, the locking pin on the inside of
the door must be in the lock. To do this, close the door.
When using an ejector pin, press the door into the lock
with one hand while programming.
Make sure to position the transponder in the middle in
front of the locking pin / in front of the lock.
The last 5 seconds before the programming process
is switched off are indicated by yellow flashing and
acoustic signals. Optical signals are only visible after the
optional light guide has been installed.
Optical signals
Quick flashing
Short flashing
Long flashing
Acoustic signals
Short
Long
The optical and acoustic signals are differentiated as follows: