BD
A CAP
TOS MIF
ARE / CAP
TOS iChar
ge MIF
ARE 22-09-22 (GB)
17
The locking system is in „assigned use“ mode after the master card has been programmed. If you would like to use
the lock in “shared use“ mode, the next thing to do is to change the operating mode. To do this, please follow the
instructions on page 20 and then continue with the section “Closing and Opening“ on page 17.
PROGRAMMING THE USER CARDS
(only for “assigned use” mode)
In “assigned use“ mode, a maximum of 250 different user cards can be programmed per lock. It is not possible
to program user cards in “shared use“ mode. In “shared use“ mode, the lock can be opened and closed without
programming the user cards (see Closing and Opening). For the programming of transponders, the lock must be in
opend position.
After programming, the user cards can open and close the lock.
Programming user cards
Hold the master card
in front of the lock.
Hold the user card in front
of the lock. The card is
accepted and programmed.
This process can be repeated
to program multiple user
cards.
Card is not accepted.
Hold the master card
in front of the lock.
CLOSING AND OPENING
Closing
Hold the user card
in front of the lock.
continue on page 18