BD
A CAP
TOS MIF
ARE / CAP
TOS iChar
ge MIF
ARE 22-09-22 (GB)
2
GENERAL DESCRIPTION
The Captos and Captos iCharge locking systems are electronic furniture locks based on RFID technology that are
intended for use inside buildings. Power is supplied via cabling from a controller. The lock is available in the versions
Captos and Captos iCharge. Captos iCharge has the same functions as the Captos plus a USB charging function for
smartphones and tablets as well as RGB backlighting that can be individually adjusted in color in the LEHMANN
Management Software LMS. Emergency equipment, vital medicines and similar items must not be locked with these
locks, as access to these items cannot be guaranteed in the event of a malfunction.
This operating instruction provides you with information on how to operate the locking system correctly. Keep the
operating instructions in an easily accessible place. Incorrect use can destroy the locking system and lead to the loss
of any warranty claims.
Please be sure to observe all warning and safety instructions and read the operating instructions completely before
you start with the installation, commissioning and programming. The use of these locking systems in combination
with additional mechanical or electronic solutions from other manufacturers must be checked for compatibility. We
do not accept any liability for damage resulting from incompatibility.
Text and graphics have been prepared for you with care. No liability is accepted for any errors that occur.
Changes to the scope of delivery and the technical data are also possible without prior notice.
ATTENTION:
The locking system can be configured with master and programming cards or with the LEHMANN
Management Software LMS. The usage with master and programming cards is described in this
document. The LMS software and the associated manuals can be found at https://lms.lehmann-
locks.com.
SUPPLEMENTARY DOCUMENTS
• Operating instructions „Primary Controller / Secondary Controller“
• User manual for the LEHMANN Management Software LMS
• Installation manual for the LEHMANN Management Software LMS
TECHNICAL SPECIFICATIONS
Technical data Captos MIFARE or Captos iCharge MIFARE
RFID technology
MIFARE® Classic, MIFARE® DESFire® EV1 / EV2
Frequency
13,56 MHz
National legislation about permissible radio frequencies must be observed.
Supported
transponders
Compatible with the following RFID transponders:
• MIFARE® Classic, • MIFARE® DESFire® EV1 / EV2, • ISO 14443A
Existing transponders must be checked for compatibility and reading distance.
MIFARE® Classic transponders are only supported in „Assigned use“ mode. MIFARE®
Classic transponders cannot be used with the LMS.
Nominal Voltage
12 VDC
Power supply
via custom 4-wire cable from controller
Charging Current
(iCharge)
max. 0,5 A