BD
A CAP
TOS MIF
ARE / CAP
TOS iChar
ge MIF
ARE 22-09-22 (GB)
5
Programming
card set
For certain programming functions, programming cards are required in conjunction with the master
card. The programming card set consists of 3 programming cards:
• P1: Mode (change of mode)
• P2: Sound (activating or deactivating acoustic signals)
• P3: Reset (reset to factory settings)
Programming card
„P4: Auto Locking”
The programming card P4: Auto Locking can only be used in the operating mode „assigned use“. The
activation takes place together with the master card. After opening the lock with a transponder, the
lock closes automatically after 5 seconds.
Programming card
„P5: Status-LED“
In conjunction with the master card, the status LED on the CAPTOS or CAPTOS iCharge can be
deactivated and activated with the programming card P5: Status LED.
Update card
In conjunction with the master card, the update card allows firmware updates to be loaded into
this system.
Service key
The individual service key allows a reordering of the master card. It is not possible to reorder a mas-
ter card without a service key! This card has no electronic function!
You can either use user cards from LEHMANN or a third-party provider based on ISO 14443A as transponders / user
cards. Please note the possible restrictions on user cards from third-party providers:
• The extensive security concept, which was specially designed for this locking system in connection with the user
cards from LEHMANN Vertriebsgesellschaft mbH & Co. KG, may be affected when using user cards from a third
party.
• The operating mode „shared use“ is only possible with user cards from third-party providers with the appropriate
write access to the user cards.
• Transponder cards with a so-called „Random UID“ are not supported.
Third-party transponders must be checked in advance for compatibility and reading range.
To enable the highest possible level of security, transponder cards based on MIFARE® DESFire are required. MIFARE®
Classic transponders are not supported by the LEHMANN Management Software LMS.
MIFARE® Classic transponders can only be used in „assigned use“ mode when the lock is configured with a master card.
Please note that installation, master, user and programming cards must be ordered separately.
Store the master card and the card with the service key carefully and securely!
ADDITIONAL FUNCTIONS WITH THE CAPTOS ICHARGE
The Captos iCharge has compared to the
Captos additionally a USB port for charging
smartphones and tablets. Mobile devices are
charged with up to 5 mA.
To do this, the device to be charged is
connected to the USB port on the lock.
Furthermore, in the LEHMANN
Management software LMS a backlighting
fuction can be activated and can be
set individually.
Backlighting
USB port
