BD
A M610 L033-A03 2021-08-17 (GB)
12
DELETING INDIVIDUAL TRANSPONDER CARDS
(only for “Assigned use“ mode)
Insofar as further user cards were programmed on the lock, these can continue to be used on this lock after an
individual user card has been deleted. For the deleting process, the lock must be open. To do this, first carry out an
emergency opening with the master card if necessary (see Emergency opening, P. 11).
Should the user card be lost, then please proceed as follows.
Deleting individual user cards
Master
Hold the master card
in front of the reader
User
Hold the user card to
be deleted in front of
the reader.
Master
Hold the master card
in front of the reader.
DELETING ALL TRANSPONDER CARDS
(only for “Assigned use“ mode)
The deleting process can only be carried out when the lock is open. Should there be no authorised user card to hand,
first perform an emergency opening using the master card.
Deleting all user cards
Master
IMPORTANT: Hold the
master card in front of the
reader until all the following
optical and acoustic signals
have been received.
5 seconds
Master
IMPORTANT: Hold the
master card in front of the
reader until all the following
optical and acoustic signals
have been received.
5 seconds
