BD
A M610 L033-A03 2021-08-17 (GB)
3
CARE AND MAINTENANCE
U
Do not spill any liquid over or into the individual components of the system, and never immerse the components
in any liquid.
U
The product should not be exposed to direct sunlight.
U
Clean the system with a clean, soft, damp cloth only.
U
Do not use any cleaning agents containing abrasives or solvents, as these may damage the housing.
U
Treating any of the electronic and mechanical components improperly or in any way other than described
in these operating instructions may lead to malfunctions and the loss of warranty.
FACTORY SETTINGS
The system can be closed and opened at this point of time with one or more installation cards. You have the option
of changing the operating mode (see Changing the operating mode, P. 13).
FUNCTIONAL DESCRIPTION
This locking system is a compact, battery-powered furniture lock for different applications in the home and office.
Opening and closing are powered by an electric motor. Contactless RFID technology based on 13.56 MHz is used
as a �key“.
Two operating modes are available:
Only the M610 L033-A03 with a spacer is suitable for use on metallic surfaces.
Please note that the distance between two or more RFID readers must be at least 5 cm.
This system is not intended for „push-to-open“ applications. If required, this needs to be tested on individual basis.
Lock operating mode
Description
Assigned use
(factory settings)
There is a fixed assignment between the transponder cards and the locks. The user cards are
programmed or deactivated at the lock by means of a master card. The system thus allows
the granting of selective access authority for an item of furniture (e.g. cabinet), so that
only authorised persons with a transponder card have access. A transponder card can be
programmed simultaneously on multiple locks with �Assigned use“ operating mode.
Up to 50 different transponder cards can be programmed per lock.
Shared use
With the user card, a user can use a free lock / storage of his choice. It is not possible to
program the user card using the master card. If a lock is closed with the user card, the user card
and the furniture lock are coupled to each other. The card cannot be used at any other lock
in �shared use“ mode, and the lock will not accept any other user card. This coupling is only
deactivated when the user opens the lock again with his user card. The card can now be used
for another lock.