BD
A M410 T
A03 / 2019-09 (GB)
12
SWITCHING TO FIXED CODE MODE
The lock must be in open position. There must be no battery warning.
The fixed code must be 3 to 10 digits.
If you have already changed the default master code, enter your valid master code here. In order to confirm the
master code, press the keys
x
+
simultaneously.
The LED display first flashes red twice after pressing the enter button and then turns to a continuous green light until
a new fixed code has been entered.
Now enter your new personal fixed code immediately. When entering, make sure that the LED display acknowledges
each key input.
If you cancel the enter process of a new fixed code with the cancel button or if you enter an incorrect code (invalid
code length), the code 1-2-3 will automatically be valid. In this case the LED display flashes red ten times.
Check that the code has been accepted correctly with an open cabinet door.
Switching to Fixed Code mode deactivates the function „Automatic opening in Free Code mode“ or „Automatic
closing in Fixed Code mode“ which may have been activated before.
Enter of master code (example: factory settings)
OPENING & CLOSING IN FIXED CODE MODE
If an invalid code is entered, the LED display flashes red three times.
Keys
2
Display
The lock waits for entering
a new fixed code (conti-
nuous green light).
Enter of new fixed code (example: 1-4-5-6)
Keys
1
4
5
6
Display
When the LED display
turns off, the new fixed
code is valid.
Keys
9
0
8
0
7
0
5
5
5
5
x
+
Display
The lock is in configuration
mode (continuous green
light).
simultaneously
Close (example: 1-4-5-6)
Open (example: 1-4-5-6)
Keys
1
4
5
6
Display
Lock closes.
Keys
1
4
5
6
Display
Lock opens.
