BD
A M410 T
A03 / 2019-09 (GB)
13
USER CHANGES THE FIXED CODE
The lock must be in open position. There must be no battery warning.
The fixed code must be 3 to 10 digits..
If you have already changed the default fixed code for the user, enter your valid code here.
The previous code will be overwritten by entering the new code.
After the buttons
x
+
are pressed simultaneously the LED will turn to a continuous green light until a new fixed
code is entered.
Now enter your new personal fixed code immediately. When entering, make sure that the LED display acknowledges
each key input.
If the new code is not entered correctly, the previous code remains valid. In this case, the LED display flashes red ten
times.
Check with the open cabinet, that the new fixed code has been accepted correctly (see page 12, „Opening & closing
in Fixed Code mode“).
Enter of valid fixed code (example: 1-4-5-6)
Keys
1
4
5
6
x
+
Display
The lock waits for entering
a new fixed code (conti-
nuous green light).
simultaneously
Enter of new fixed code (example: 1-2-3-4-5)
Keys
1
2
3
4
5
Display
When the LED display
turns off, the new fixed
code is valid.
