BD
A M610 T
A03 / 2019-09 (GB)
2
GENERAL SYSTEM DESCRIPTION
The M610 TA03 (keypad) locking system is a locker lock with a motor-driven locking bolt intended for use in the
home and office. This manual gives you information in order to install and operate the locking system correctly. Keep
the operating instructions in an easily accessible place. Using the locking system in applications for which it is not
intended may result in irreparable damage to it and render any claims null and void.
Wording and graphics have been prepared for you with care. However, no liability will be assumed for any mistakes
that may have occurred. The scope of items included by the manufacturer in the system as well as technical specifi-
cations are subject to change without notice.
These instructions must not be reproduced in any way (print, photocopy, etc.) either in whole or in part without
written consent from LEHMANN Vertriebsgesellschaft mbH & Co. KG.
IMPORTANT:
Only install the locking system when it is unlocked. For the correct mechanical connection
of the locking system to your locker, please refer to the installation instructions of your locker
manufacturer. Perform all programming operations and functional checks when the locker
door is open. In the event of a malfunction, you thus have access to all system components.
OPERATING DESCRIPTION
The M610 TA03 electronic locking system provides you with a convenient means of locking and unlocking your locker
electronically. The system has two operating modes.
Operating mode 1: Free Code
The user selects his own individual code (3 to 10 digits) for opening and closing the lock. In this mode, the code
memory is deleted again as soon as the user opens his locker. This means that the next user can select his new
individual code.
Operating mode 2: Fixed Code
The user can only open and close the lock with a fixed preset code (3 to 10 digits).
