background image

 

User manual Alpha stairlift 

Version Dez. 2014 

 

Email: office@lehnerlifttechnik.at 

    page 3 of 15 

Introduction 

 
Congratulations for your curved stairlifts type Alpha. Before starting to use the stairlift, 
please read the operating instructions carefully in order to assure a safe and reliable 
operation of your stairlift. 
 

Please observe the following guidelines: 

Ensure that only qualified stairlift installers install and service the stairlift. Under no 
circumstances is anyone other than a qualified installer allowed to install, adjust, or service 
any mechanical or electrical device on this equipment. Failure to follow this warning can 
result in safety system compromises or defeat; this can result in serious injury or death. 
Lehner Lifttechnik GmbH accepts no liability for property damage, warranty claims or 
personal injury, in this circumstance. 
Passenger safety is the result of countless d

etails in the equipment’s design, manufacture, 

and installation. After installation, reliable operation and continual safe operation requires 
regular service and inspection at least once per year, or more frequently where usage, 
environment, or local jurisdiction requires. As the owner, you are responsible for ensuring 
that regular service and inspections occur in a timely manner. 
Refer to this manual for specifications, operating instructions and maintenance of your 
stairlift. Upon completion of installation, the dealer must provide you with the information 
below and ensure it is recorded in this manual. In addition, either the dealer or you must 
keep any service and/or maintenance records in the Maintenance Record section of this 
manual. 
The chairlift may only be used by a person who is familiar with its use. People not meeting 
this requirement (for example children) may use the seat under the supervision of a 
competent person who takes the responsibility. Keep the keys for the seat in a secure 
place and do not leave the key in the switch on the armrest or on the hall calls when not in 
use. 
 
Take the following precautions: 

  The Alpha stairlft is intended solely for transporting one person sitting on the seat. 

  Maximum loading capacity is 160kg 

  Use the seatbelt while driving  

  Before driving, make sure you sit safetly on the chair and the swivel mechanism is 

securly engaged. 

  Watch the driveway for obstacles while driving 

  Do not drive standing on the seat  

  Do not let children play on the seat or in the vicinity when using it. 

  The seat is not designed to transport cargo. 

  Protect the seat against misuse by unauthorized persons. 

  To prevent accidents, adhere strictly to the instructions in this manual and keep 

clear of moving parts at all times. 

  Ensure that only qualified personnel perform maintenance. 

  Before calling or sending the lift make sure the driveway is clear and nobody is 

sitting on the chairlift. 

  Do not use the lift in case of fire! 

 
The lift is equipped with the following safety features: 

Summary of Contents for ALPHA
















Reviews:

Related manuals for ALPHA