Liftboy 1/2/3 Handbook
Stand 01/2019
Liftboy 1/2/3
Plattform Lift
Seite 7 of 10
Describtion of Operation
The handheld controller or the fixed control button on a column can be mounted at
the platform by the user of the platform. Operation buttons and the symbols are
easy to understand.
IMPORTANT:
The user must be positioned in the center of the platform, in the
middle between entry and exit position. Only 1 person shall be using the platform at
a given time. It is not allowed to be used by more persons at the same time.
Up - function, from the bottom level
1. When the platform is on the bottom level and the access ramp is down, the
wheelchair user can drive on the platform.
2. When you press the button „Up“, the access ramp drives upwards and takes
over the function of the safety barrier. “Up” is not active as long as the button
won´t be pressed.
3. If the access ramp is in the upper position and “Up” will be continuously pressed,
the platform starts to move upstairs.
4. When the platform has reached the upper level the wheelchair user can drive off
the platform onto the upper landing.
Down – function, from the top level
1. The platform must be located in the upper level. The wheelchair user drives on
the platform.
2. When you press the button "Down" the platform drives down. As long as the
button is pressed this function is active.
3. When the platform has reached the lower level and the button is still pressed,
the access ramp will be lowered and the wheelchair user can leave the platform.
