2020-02
CANVASA II + II can filling machine operating manual
59
Replacement of the drivers:
Since the diameter of the sleek can is smaller than that of the standard can, the corresponding
drivers (6x) must be used in each case. These can be removed by loosening two screws in each
case.
Fig. 19 Changing drivers
Modification of the filling valve:
It is important that the outer diameter of the filling tube corresponds to the inner diameter of the
can due to the operating principle of the filling valve. This is why the filling tube has a removable
sleeve. With the sleeve (see below right), the outer diameter corresponds to that of the standard
can; excluding that of the sleek can (see below left).
Fig. 20 Filling valve with and without sleeve (for standard and sleek cans)