2020-02
CANVASA II + II can filling machine operating manual
7
Time limits
The machine is designed for a service life of 20 years.
The prerequisites for this service life are:
Use as intended
Compliance with the maintenance intervals as per the maintenance plan
Compliance with cleaning as per cleaning recommendations and care plan
Use of original LEIBINGER spare parts. Wear parts which have to be replaced depending on
operating hours or wear are excluded from this
Other limits
The following points must be fulfilled for the location of the machinery:
The machine must be set up in a weatherproof industrial building
The location must be suitable for bottling foodstuffs (beverages)
The entire machine and its immediate surroundings must be sufficiently ventilated (CO2
emissions of the machine)
Transport/storage:
- Temperature -20 to +50 °C
- Relative air humidity 30 to 75% without condensation
- Air pressure 500 to 1060 hPa