Group 8
Job Editor
Page 181
JET3 Series
Release 2.02
7.5.1 Test print
With the option
<Test Print>
a defined default job with set internal PrintGo-source is
loaded. This job can be used by the operator as basis to create a new job or to control
the print function of the Printer.
The default job is loaded as follows:
Figure 83
Test print (Load default job)
or
1
–
Drop-down menu <Extra>
5
–
<OK> button
2
–
Option <Test Print>
6
–
<Cancel> button
3
–
Direct button (shortcut) <Testprint>
7
–
<Job loaded> confirmation
4
–
Confirmation prompt
8
–
Loaded <Test Print>
Click on the menu item
<Extra>
(1)
and select the option
<Test Print>
(2)
or click on
the accordant direct buttons (shortcut)
(3)
.
A
confirmation prompt (4)
, pops up
Confirm by pressing the
<OK>
button
(5)
or cancel the process with the
<Cancel>
button
(6)
.
A
message (7)
, that the test print-job is loaded pops up.
Confirm the message with the
<OK>
button
(5)
. The job is now loaded and ready for
to be printed.
ATTENTION
For the
<Test Print>
job all signals are generated internally and no
sensor or encoder is required. Therefore, if the test print is loaded while
<print start> is activated, the Printer starts immediately with the printing
process.
Caution! Ink escapes immediately from the print head
1
2
4
3
5
5
6
7
8
Summary of Contents for JET3
Page 1: ...Operating Manual V2 02 Please keep for future reference ...
Page 2: ......
