Group 10
Setting-up/Maintenance
Page 363
JET3 Series
Release 2.02
10.1.2 TAG-reader
The TAG-reader of the Leibinger Printer printer guarantees a faultless function with
regard to the correct usage of ink and solvent.
The TAG-reader makes sure that only ink and solvent is used that is approved by
LEIBINGER.
With each refill the TAG of the ink or solvent bottle is checked for a valid TAG. If no valid
TAG is activated during the refill the printer will shut down to stand-by mode. Each TAG
can be activated only once.
Information
A TAG is electronically readable label which holds coded information. The
information is readable with TAG reader. The coded information is read out
wireless by radio.
Figure 186
1
–
Reservoir tank „Ink“
4
–
Refilling bottle
2
–
Reservoir tank „Solvent“
5
–
TAG area on the refill bottle
3
–
TAG reader
10.1.2.1 Execution of the TAG-activation and refilling
Attention
The reservoir tanks
mustn’t be refil
led without respective messages from the
printer.
A too early refilling bears the risk of overfilling and spillage of ink or solvent!
1
2
3
4
5
Summary of Contents for JET3
Page 1: ...Operating Manual V2 02 Please keep for future reference ...
Page 2: ......
