Measurement Preparation
SPRINTER 100/100M/200/200M
11
3.2
Set-up instrument
Levelling
Step
Description
1.
Simultaneously depress the locking clips (a) on the battery cover and remove it.
2.
Insert the 4 AA dry cells the right way round according to the positive and nega-
tive signs as indicated on the cover.
!
Always replace with a complete battery set!
!
•
Do not use old and new batteries together.
•
Do not use batteries from different manufacturers or batteries of
different types.
•
For type of battery, refer to Technical Data.
3.
Place the compartment back and push until a click is heard.
Step
Description
1.
Set up the tripod. Extend the legs to a suitable length and ensure that the tripod
head is approximately level. Tread the tripod shoes firmly into the ground to
ensure stability.
2.
Mount the instrument on the tripod by screwing the tripod screw onto the base
of the instrument.
