background image

EN

9

LENS

• A camera lens can have the effect of a magnifying glass when 

exposed to direct frontal sunlight. The camera must therefore be 

protected against extended exposure to direct sunlight.

• Attaching the lens cap and keeping the camera in the shade or 

ideally in its camera case, will help prevent damage to the 

interior of the camera.

RECHARGEABLE BATTERY

• Improper use of the batteries or the use of unapproved battery 

types may result in an explosion!

• Do not expose the rechargeable battery to sunlight, heat, 

humidity or moisture for prolonged periods of time. Likewise, the 

batteries must not be placed in a microwave oven or a 

high-pressure container as this would pose a fire or explosion 

hazard.

• Do not under any circumstances charge or insert a damp or wet 

battery into the camera!

• A safety valve in the battery ensures that any excess pressure 

caused by improper handling is discharged safely. It is neverthe-

less important to dispose of a bloated battery immediately. It 

may pose an explosion hazard!

• Keep the battery contacts clean and easily accessible. Although 

lithium-ion batteries are secured against short circuits, they 

should still be protected against contact with metal objects like 

paper clips or jewelry. A short-circuited battery can get very hot 

and cause severe burns.

• When a battery is accidentally dropped, make sure to check the 

housing and the contacts immediately for any damage. A 

damaged battery can damage the camera.

• The battery must be removed from the camera or charger and 

must be replaced immediately in case of a strange smell, 

discoloration, deformation, overheating or leakage. Continued 

use of the battery may result in overheating, which can cause 

fire and/or explosion!

• Never throw batteries into a fire as they may explode.

• Keep the battery away from sources of heat in case of leakage 

or if you smell burning. Leaked fluid can catch fire!

• The use of other chargers not approved by Leica Camera AG can 

cause damage to the batteries – and in extreme cases – cause 

serious or life-threatening injuries.

• Make sure that the power socket is freely accessible at all times.

• Do not attempt to open the battery or the charger. Repairs must 

only be carried out by authorized service centers.

• Keep batteries out of the reach of children. Batteries can cause 

suffocation when swallowed.

FIRST AID

• Battery fluid may cause blindness if it comes into contact 

with the eyes. Rinse the eyes thoroughly with clean water 

immediately. Avoid rubbing. Seek medical attention 

immediately.

• Leaked battery fluid poses an injury hazard when it comes in 

contact with clothing or skin. Rinse the affected areas 

thoroughly with clean water.

Safety remarks

Summary of Contents for 20 002



















































































































































Reviews: