EN
91
Miscellaneous
INSTALLING FIRMWARE UPDATES
Leica is constantly working on developing and optimizing its prod-
ucts. As many functions of the camera are entirely controlled by
software, some of these improvements and extended func-
tions can be installed at a later date.
Leica provides firmware updates at irregular intervals for this
purpose. Information about any resulting changes or additions to
the details in this manual can be found on our website.
www.leica-camera.com
Procedure
:
1. Turn off the camera
2. Insert the memory card in an integrated card reader, or one
connected to your computer
3. Formatting the memory card
4. Download the firmware file from our website under the link
"FIRMWARE"
5. Save the *.FW file to the highest level of the card folder struc-
ture.
6. Decompress the *.FW file if necessary
7. Remove the memory card from the card reader
8. Make sure that the camera is switched off, insert the memory
card in the camera and close the bottom cover
9. Keep the function button pressed down and then switch the
camera on
The update process begins. This can take up to 15 minutes.
Displays
Viewfinder LED
(permanently lit up)
Back LED
During the procedure
UP
lights up
After an update
UP
goes out
Battery capacity too
low for update proce-
dure
bc
flashes slowly
Update not possible*
Err
flashes quickly
*e.g. because the camera can't find an update file on the card
Summary of Contents for 262
