Leica 6847 Instruction Manual Download

Page: 68 / 72

Tec

hnical Dat

TECHNICAL DATA

Camera name

Leica S3

Camera type

Digital medium format SLR camera

Type no.

6847

Lens mount

Leica S bayonet with contact strip for communication between lens and

camera

Lens system

Lens systemLeica S lenses, compatible with several third-party medium

format lenses via adapter

Picture format/Aspect ratio

30 x 45 mm/3:2

Picture sensor/Resolution

Leica CMOS sensor with 4.6 µm pixel size, with micro lenses, 64 MP

Low-pass filter

None (for maximum sharpness), suppression of moiré effects due to

external digital image processing on the sensor

File formats

Photo: DNG (raw data), DNG + JPG, JPG

Resolution DNG: 64 MP, JPG: 64 MP, 24 MP, 4 MP

File size

DNG: approx. 70 MB, JPG: approx. 2-30 MB (depending on resolution

used, image content and ISO level), video: up to 29 minutes of uninter-

rupted recording

Buffer memory

2 GB, maximum number of pictures in a series (depending on memory

card used): DNG: max. 6, JPG: unlimited

Color spaces

Adobe® RGB, sRGB, ECI RGB 2.0

White balance

Automatic, manual via measurement, 8 presets, color temperature input

Storage medium

CF cards (max. UDMA 7), SD-/SDHC-/SDXC < 512 GB memory cards

UHS-I (recommended), UHS-II, 4K video recordings can only be stored on

SD cards (UHS-I).

Menu languages

English, German, French, Italian, Spanish, Russian, Japanese, Traditional

Chinese, Simplified Chinese, Korean, Portuguese

Exposure control

Exposure metering

Open aperture measurement through the lens (TTL)

Metering methods

Spot (3.5%), center-weighted, multi-field metering (5 fields)

Metering memory lock

Pressing the pressure point on the shutter button saves 1 picture or

continuously with the joystick

Exposure compensation

± 3 EV (exposure values), adjustable in half increments

Automatic bracketing

3 or 5 pictures, optionally 1⁄2 EV, 1 EV, 2 EV, 3 EV deviation between

individual pictures, exposure can be changed through the aperture and/

or shutter speed depending on the selected operating mode

Measuring range

(with 2.5 aperture and ISO 100), Spot metering: EV 2.7 - 20, Center-

Weighted and Multi-Field metering: EV1.2 - 20, warning in viewfinder if

the measuring range of the measuring cell for the existing multi-field

photo diode light is exceeded or falls below the range (continuous light

measurements)

Sensitivity

ISO 100, ISO 200, ISO 400, ISO 800, ISO 1600, ISO 3200, ISO 6400,

ISO 12500, ISO 25000, ISO 50000, automatic

Exposure modes

automatic program with program shift function

( ), aperture priority mode ( ), shutter priority mode ( ), manual setting

( )

Flash exposure control

Flash unit connectors

Accessory shoe with central and control contacts, LEMO® or standard

flash jack without light output control

Synchronization

Flash sync time: 1⁄125 s or 1⁄1000 s for lenses with central shutter,

slower shutter speeds can be used, optionally at the start or end of the

exposure; Flash function with faster shutter speeds (1⁄180 s – 1⁄4000 s)

available with relevantly equipped flash units (HSS mode)

Flash measuring cell

Multi-field photo diode

Flash exposure metering/control

(with system-compatible Leica flash units attached to the camera)

Controlled by the flash unit with TTL pre-flash metering, including

automatic transfer and consideration of the sensitivity and set/controlled

lens, all of the exposure modes can be used, automatic adjustment of the

flash light to the existing light

Linear flash mode

(with system-compatible, appropriately equipped Leica flash units, linear

flash mode with TTL pre-flash metering and automatic TTL HSS control)

For flash photography with shorter shutter speeds than the sync speed by

firing several flashes in quick succession, automatic switch-over to HSS

flash mode if the sync speed is not achieved

Stroboscope flash mode

(Taking pictures while recording video)

With exposure modes

and

including automatic adjustment of the

exposure time with system-compatible, relevantly equipped Leica flash

units

Flash exposure compensation

Setting option in relevantly equipped flash units

Displays in flash mode

Ready status indicated by flashing or constantly lit flash icon in the

viewfinder

Focusing

Sharpness recognition

Phase detection process in Live View mode based on contrast

Sensor/metering field

A central cross-type sensor defined by cross hairs on the focusing

screen; the metering field can be positioned freely in Live View mode

Flash modes

Optional AFs (single) = focus priority, AFc (continuous) = release priority,

MF (manual), manual override of the automatic setting at any time

Metering memory lock

Pressing the pressure point on the shutter button saves 1 picture or

continuously with the joystick

Autofocus drive

In lenses

Viewfinder system

Eyepiece

High eye point viewfinder, diopter correction adjustable from -3 to +1 dpt.

on the viewfinder

Viewfinder

98%

Magnification

0.87 times with 70 mm lens, when set to infinity and 0 dpt.

Summary of Contents for 6847









































































Search results

Summary of Contents for 6847

Reviews:

Related manuals for 6847

Brands by name

Popular brands

Leica 6847, Instruction Manual

Search results

Summary of Contents for 6847

Reviews:

Related manuals for 6847

Brands by name

Popular brands