Aperio GT 450 DX User’s Guide, Revision B © Leica Biosystems Imaging, Inc. 2022
62
Chapter 6: Troubleshooting
2.
Check if there is a slide on the stage or partially on the stage.
CAUTION:
Restarting the scanner with a slide on the stage may damage the slide.
3.
If there is a slide on the stage, carefully remove it from the stage without touching the surrounding components.
4.
Return the pusher to the retracted (safe) position.
a.
Align the pusher teeth with the slide stage
grooves:
b.
Slide the stage to the rear of the scanner, as shown:
c.
Slide the pusher to the front of the scanner, as shown in the rightmost image below. Hold the pusher in one of
the areas circled below. Avoid touching the LED and objective.
