Preparation before surgery
26
ARveo / Ref. 10 747 384 / Version 04
X
Press the "All Brakes" button on the handle and move the optics
carrier into the A-position.
The marking (1) must point towards A.
1
X
Press the autobalancing push-button (2) on the control unit.
During the balancing procedure, the push-button flashes green
and an acoustic signal sounds (can be deactivated in the service
menu).
2
The following dialog window appears on the touch panel monitor:
The balancing procedure can be canceled at any time using
"Interrupt Balancing".
The first balancing step is completed when the acoustic signal no
longer sounds and the autobalancing push-button is no longer
flashing.