Control unit with touch panel
46
ARveo / Ref. 10 747 384 / Version 04
9.3.2 Setting the "Main" start values
For the selected user you can set the start values for the illuminator,
working distance and magnification on this screen.
X
Clicking the
or
key changes the values in increments of
one. Holding down the button with your finger changes the
value in increments of five.
X
You can also set the desired value by directly clicking the bars.
X
On the "Main" user settings screen you can set the status of the
BrightCare Plus safety function for the selected user.
X
On the "Main" user settings screen you can permanently save
the default settings for working distance Reset. If "WD Reset" is
activated, the working distance motor automatically moves to
the working distance saved for each user in the user settings
when "All Brakes" are released. This function is deactivated in
the factory default configuration.
9.3.3 Setting the "Speed" start values
For the selected user you can set the start values for the travel
speed of the magnification, working distance and XY motors on this
screen.
X
Clicking the
or
key changes the values in increments of
one. Holding down the button with your finger changes the
value in increments of five.
X
You can also set the desired value by directly clicking the bars.
X
On the "Speed" menu screen you can also select the desired
brake combination "Focus Lock" or "XYZ Free" for the handle
function "Selected Brakes".
X
Activate the desired brake combination "Focus Lock" or
"XYZ Free" by clicking the relevant button.
The button for the preselected brake combination lights up
green.
X
Clicking the "WD Reset" button activates/deactivates the
"WD Reset" function and the color of the button changes to
green (activated) / gray (deactivated).
