Control unit with touch panel
ARveo / Ref. 10 747 384 / Version 04 51
9.4.2 Maintenance –> Check Switches
On this screen, you can test your handles and the optional foot/
handswitch.
Top right selection field
In this field you can select the connection you are using or the
desired handle.
X
Scroll forwards or backwards in the list by clicking the
arrowheads to select the connection.
Bottom right selection field
In this field you can select the foot-/handswitch you want to check.
X
Scroll forwards or backwards in the list by clicking the
arrowheads to select the foot-/handswitch.
X
Press all of the keys, one after the other, of the foot-/
handswitch or handle you want to test.
If the key you have pressed is functioning properly, a green dot
appears on it on the display. The comment "Tested" appears in
the caption field of the key.
9.4.3 Maintenance –> Microscope Settings
On this screen you can configure the accessories you are using.
This ensures that the correct magnification is shown on the "Main"
menu page.
Select Surgeon Tube
In this field you can enter the binocular tube currently being used
by the surgeon.
X
Scroll forwards or backwards in the list by clicking the
arrowheads.
Select Eyepiece
In this field you can select the magnification of the eyepieces being
used by the surgeon.
X
Scroll forwards or backwards in the list by clicking the
arrowheads.
If you do not make a selection, the magnification is
calculated for the standard equipment:
binocular tube 30°–150° and eyepiece with 10
magnification.
