Warning against flammable substances.
Product must not be opened or modified or tampered
with.
Indicates the temperature limits at which the product may
be stored, transported or used.
2.2
Definition of Use
•
Scanning objects
•
Measuring horizontal and vertical angles
•
Measuring distances
•
Capturing and recording images
•
Recording measurements
•
Computing with software
•
Remote control of product
•
Data communication with external appliances
•
Operate the product without training by Leica Geosystems or an approved
partner
•
Operate the aircraft in a declared
No Fly Zone
without permission
•
Operate the aircraft without governmental authorisation
•
Use of the product without instruction
•
Use of product as a sole source of information for navigation
•
Use outside of the intended use and limits
•
Disabling/bypassing of safety systems
•
Removal of hazard notices
•
Opening the product using tools, for example a screwdriver, unless this is
permitted for certain functions
•
Modification or conversion of the product
•
Use after misappropriation
•
Inadequate safeguards at the working site
•
Use with accessories from other manufacturers without the prior written
explicit approval of Leica Geosystems
•
Use of products with recognisable damage or defects
•
Ensure that all parts are in good condition before each flight. DO NOT fly
with worn or damaged parts
•
If the pilot disabled the obstacle avoidance limitation, he must manually
maintain a safe distance from people, buildings, high-voltage power lines,
tall trees, water and other hazards when flying the aircraft.
•
Even the BLK2FLY is rated IP54, flying while raining/snowing is prohibited
•
DO NOT add extra weight to the BLK2FLY
•
DO NOT go near or touch the propellers while they are spinning. It can
cause serious injuries
•
DO NOT attach 3-rd party equipment to the BLK2FLY
•
Respect system limitations
•
Disconnect the battery during transportation to avoid damage or injury
Intended use
Reasonably
foreseeable misuse
Information on flight
warnings
Safety Directions
9
