10
Operation
10.1
Setup Procedures
10.1.1
Airspace Limitations
AIRSPACE INFORMATION
is automatically available when being on-site and
checking the airspace information in the BLK2FLY Live app in
Map View
. An
Internet connection over the SIM card or WLAN is mandatory.
It is also possible to open the
Map View
within the BLK2FLY Live app in the
office being connected to WLAN, pan within the map to the upcoming flight
areas and check the airspace information.
☞
The airspace information cannot be downloaded to be shown in off-
line mode. It is live information only. Therefore it is highly recom-
mended to have always the Apple iPad with SIM card and mobile data
activated.
7.6.5 AIRSPACE INFORMATION Screen
for details.
10.1.2
Firmware Updates
The firmware update requires an Internet connection. Use WLAN or LTE on the
Apple iPad to download new firmware.
In order to upload firmware to BLK2FLY and the Smart Battery GEB374, the
BLK2FLY Live app must be paired with the correct BLK2FLY.
☞
The BLK2FLY Live app can only be updated over the Apple App store.
10.1.3
Configure GNSS RTK
Follow these steps to configure GNSS RTK for network corrections. Refer to
SmartNet/NRTK Configuration screen
Supported data and network protocols:
RTK data protocols: RTCM v3.0, v3.1, v3.2 MSM
RTK Network protocol: iMAX, MAC (RTCM SC 104), VRS, FKP
10.2
Preparation Procedures
•
The operator must check himself , whether operational approval by his
civil aviation authority or other entity is needed. If so, he is responsible
to perform all the risk assessment and concept of operations (ConOps).
Refer to
for details.
•
Charge the required number of batteries
•
Ensure the Apple iPad is charged
•
Check weather forcast. The BLK2FLY cannot be flown in rain and strong
6.3.1 Meteorological Conditions
for details
94
Operation