Preparation
12
Inserting and
Removing the Card
and the Battery
• Check that the camera is turned off.
• Prepare a card.
• You can record or play back pictures
on the built-in memory when you are
not using a card. (P13)
1
Slide the release lever in the
direction of the arrow and open
the card/battery door.
• Always use genuine Leica batteries
(BP-DC6).
• The camera warranty does not cover
the use of other batteries.
2
Battery:
Insert it fully being careful about
the direction you insert it.
Pull the lever
in the direction of
the arrow to remove the battery.
Card:
Push it fully until it clicks being
careful about the direction you
insert it.
To remove the card, push the card
until it clicks, then pull the card
out upright.
: Do not touch the connection termi-
nals of the card.
• The card may be damaged if it is not
fully inserted.
3
Close the card/battery door.
Slide the release lever in the
direction of the arrow.
• If the card/battery door cannot be com-
pletely closed, remove the card, check
its direction and then insert it again.
• Remove the battery after use. Store the
removed battery in the battery carrying
case (supplied).
• Do not remove the battery until the
LCD monitor and the status indicator
(green) turn off as the settings on the
camera may not be stored properly.
• The supplied battery is designed only
for the camera. Do not use it with any
other equipment.
• Do not insert or remove the battery or
the card while the camera is turned on.
The data on the built-in memory or the
card may be damaged. Be particularly
careful while the built-in memory or the
card is being accessed. (P21)
LEICA
