background image

Before Use

1

Before Use

• Please note that the actual controls and 

components, menu items, etc. of your 
Digital Camera may look somewhat differ-
ent from those shown in the illustrations in 
these Instructions.

• SDHC Logo is a trademark.
• Other names, company names, and prod-

uct names printed in these instructions 
are trademarks or registered trademarks 
of the companies concerned.

THE FOLLOWING APPLIES ONLY IN 
THE U.S.A.

THE SOCKET OUTLET SHALL BE 
INSTALLED NEAR THE EQUIPMENT 
AND SHALL BE EASILY ACCESSIBLE.

CAUTION

Danger of explosion if battery is incor-
rectly replaced. Replace only with the 
same or equivalent type recommended 
by the manufacturer. Dispose of used 
batteries according to the manufac-
turer’s instructions.

Warning

Risk of fire, explosion and burns. Do not 
disassemble, heat above 60

Z

C (140

Q

F) 

or incinerate.

Marking sign is located on bottom of the 
camera.

FCC Note:

This equipment has been tested and 
found to comply with the limits for a 
Class B digital device, pursuant to Part 
15 of the FCC Rules. These limits are 
designed to provide reasonable protec-
tion against harmful interference in a 
residential installation. This equipment 
generates, uses, and can radiate radio 
frequency energy and, if not installed 
and used in accordance with the 
instructions, may cause harmful interfer-
ence to radio communications. How-
ever, there is no guarantee that interfer-
ence will not occur in a particular 
installation. If this equipment does 
cause harmful interference to radio or 
television reception, which can be 
determined by turning the equipment off 
and on, the user is encouraged to try to 
correct the interference by one or more 
of the following measures:
• Reorient or relocate the receiving 

antenna.

• Increase the separation between the 

equipment and receiver.

• Connect the equipment into an outlet 

on a circuit different from that to which 
the receiver is connected.

• Consult the dealer or an experienced 

radio/TV technician for help.

FCC Caution: To assure continued 

compliance, follow the 
attached installation 
instructions and use only 
shielded interface cables 
with ferrite core when 
connecting to computer 
or peripheral devices.

Any changes or modifications not 
expressly approved by the party 
responsible for compliance could void 
the user’s authority to operate this 
equipment.

Summary of Contents for C-Lux 2





















































































































Reviews: