122
Focus and Exposure Settings
Using Autofocus
■
When selecting [ ]
You can enlarge a section of the image to allow more precise settings of the focus
position.
•You cannot set the focus position at the edges of the screen.
Select [ ], and then press .
Use to set the focus position, and then press
[MENU/SET].
•The enlarged assist screen will appear for setting the focus
position.
Move [+] to the focus position with .
•Pressing [DISP] will bring the focus position back to the center
of the assist screen.
Changing the display of the assist screen
→ [Custom] → [Pinpoint AF Display]
[FULL]:
Enlarges the assist screen using the entire screen.
[PIP]:
Enlarges the assist screen on part of the screen.
•When [PIP] is selected, the size of the screen is enlarged or reduced approximately 3 to
6 times. When [FULL] is selected, it is enlarged or reduced approximately 3 to 10 times.
Enlarge or reduce the screen by magnification factors of x1 steps using the control dial.
Setting the timeout for the enlarged display
→ [Custom] → [Pinpoint AF Time] →
[LONG]
(approx. 1.5 seconds)
/ [MID]
(approx. 1.0 seconds)
/
[SHORT]
(approx. 0.5 seconds)
•If you release the shutter button, the enlarged display will turn off even before the
screen timeout.
Summary of Contents for D-LUX 109
Page 1: ...LEICA D LUX Instructions ...
