242
Wi-Fi
About Connections
■
When connecting with [Manual Input]
On the screen of step
1
of “If you are not sure about the WPS compatibility
(connecting by [From List])”, select [Manual Input]. (→241)
Enter the SSID of the wireless access point you are connecting to, then select [Set].
•For details on how to enter characters, refer to “Entering Text” (→52).
Select the network authentication type.
•For information on network authentication, see the instructions of the wireless access point.
Select the encryption type.
•The type of settings that can be changed may vary depending on the details of network
authentication settings.
Network authentication type
Encryption types that can be set
[WPA2-PSK] / [WPA-PSK]
[TKIP] / [AES]
[Common Key]
[WEP]
[Open]
[No Encryption] / [WEP]
(When an option other than [No Encryption] is selected)
Enter the encryption key
●
Check the wireless access points instructions and settings when a saving wireless access point.
●
If no connection can be established, the wireless access point’s radio transmission may be too
weak. Refer to “Message displays” (→269) and “Q&A Troubleshooting” (→280) for details.
●
Transmission speed may decrease, or may not be usable depending on the environment it is used
in.
Summary of Contents for D-LUX 109
Page 1: ...LEICA D LUX Instructions ...
