20
3. Screw the large clip for metallographic sam-
ples into the M4 thread hole (17.4).
4. Allen screws (17.3) for plane-parallel align-
ment.
n.b.:
Do not adjust these Allen screws. They are only
for adjustment in the factory.
5. Insert the round stage inserts with a steel
ring, inner hole of 20 mm, 30 mm and 40 mm
diameter (18.1) into the mount.
The round stage inserts are equipped with a
screw-in handle (18.2) to facilitate changing
and rotating the inserts (rotation e.g. for ori-
entation of a sample).
Please handle the round stage inserts (18)
with care. The thin inner steel rings (18.1)
should not be subjected to any pressure or
dropped.
Rough treatment can cause deformation .
Simple stage plate*
The simple stage plate (19) is assembled in exa-
ctly the same way.
Fig. 17
Stage inserts with accessories
1
Square insert plate, 150 x 150 mm,
2
Drill holes for small spe-
cimen clips (not part of standard delivery),
3
Allen screws for
plane-parallel alignment (for factory adjustment only),
4
Large
specimen clamp for metallographic objects
Fig. 18
Round stage inserts
1
Steel ring with inner hole of 20 mm, 30 mm, 40 mm,
2
Grip but-
ton, can be screwed off
Fig. 19
Simple stage plate
1
2
3
3
4
3
2
1